Features
High-speed X-ray CT scanner (industrial high-speed X-ray inspection equipment) ／High-speed X-rays CT scanner
- Compatible with 3D mechanical parts
- Ultra-fast scanning, fast reconstruction, high-precision mechanism
- Ideal for inspection of cast aluminum parts and molded resin parts
- Non-destructive visualization of internal structure and defects
Super fast | Approximately 30 times faster scan and faster reconstruction ＊1 |
High output | Adoption of tube voltage 200kV |
Workability | Fast startup (within 2 minutes) |
Operability | Automatic door (opening and closing in two directions)、One-touch button inspection |
Stability | High precision and high rigidity mechanism、Optimal design for industrial equipment level reliability and durability |
Scalability | Abundant extended functions and customization support (option) Void detection program, pass / fail automatic discrimination program, robot automation, environmental resistance (dustproof, high temperature), etc. |
＊1：Compared to conventional CT machines in the industry (according to our research) 。Image quality varies depending on the shooting conditions. (Inspection is possible within about 1 minute)
Shooting example
External dimensions（mm）
Specification table
Model | CTH200FPD | |
Inspectable size | diameter | 280mm |
height | 250mm | |
Inspection weight | Up to 10kg | |
Shooting method | horizontal shooting / horizontal camera offset shooting / diagonal shooting | |
Generator | Tube voltage | up to 200kV（mini focus） |
Detector | flat panel detector | |
Magnification | 1.4～1.8times | |
Power supply | Three-phase AC200V（3.5kVA） | |
Device dimensions （W×D×H／Excluding protrusions） | main body | 1,550mm×1,092mm×1,450mm |
| control unit | 600mm×905mm×1,100mm ※Excluding protrusions and monitors | |
Weight | main body | about 1,860kg |
| control unit | about 250kg | |
Leaked X dose | less than 1μSv/h | |
others
- Be sure to read the "Instruction Manual" before using this product.
- There is no need for qualifications regarding the handling (operation) of this product or setting of a controlled area for the installation location.
- Notification to the relevant Labor Standards Inspection Office is required at least 30 days before the installation of this machine.
